IoT-Based Smart Locker: Innovation in Automatic Package Receipt Integrated with Telegram
Main Article Content
Abstract
The development of E-Commerce in this digital era is increasingly rapid, thus affecting the use of goods delivery services. The problem that often occurs in the delivery process is that the recipient of the goods is traveling. This automatic Smart box system is designed to receive packages automatically remotely using the internet of things via the Telegram application. The system uses an ultrasonic sensor to send notifications to the Telegram bot if a package arrives by reading a distance value between 10 cm. This system also utilizes a servo motor as an actuator that can be controlled to open and close the package box. Meanwhile, to find out if the package has been placed in the package box, a load cell sensor is used to send the package weight value. This system uses an ESP32 microcontroller as the system control center and WiFi network. The system is also equipped with ESP32-CAM which is used as a security tool when goods arrive. The test results show that the tool can work well and all components can run according to their function, and connect to the Telegram bot. However, problems that are sometimes encountered are problems that may occur in the system, namely internet network problems that affect sending messages to the Telegram bot.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
S. R. Hutapea, J. Sidabalok, and K. Samosir, “Perlindungan Hukum terhadap Konsumen dalam Pengiriman Barang Melalui Perusahaan Jasa Pengiriman Barang,” J. Profile Huk., vol. 1, no. 1, pp. 2986–1624, 2023.
S. uzhwahnul azrin, Ibnu Ziad, “Rancang Bangun Smart Box Penerima Paket Berbasis IoT Menggunakan Raspberry Pi,” Emit. J. Tek. Elektro, pp. 118–125, 2022, doi: 10.23917/emitor.v22i2.19405.
Y. Fauzan, “Kotak Penerima Paket Brrbasis Iot Menggunakan Modul Esp32-Cam,” 2020.
N. Govinda and Y. Supit, “Prototype Pengiriman Notifikasi Penerima Paket,” Simtek J. Sist. Inf. dan Tek. Komput., vol. 7, no. 1, pp. 46–51, 2022, doi: 10.51876/simtek.v7i1.122.
I. Muiz, “Smart Akuarium Berbasis IOT Menggunakan Raspberry Pi 3,” J. Pendidik. Sains dan Komput., vol. 2, no. 2, pp. 333–336, 2022, doi: 10.47709/jpsk.v2i02.1742.
subandi M. Napitupulu, “Penerapan Prototipe Sensor Load Cell , Ultrasonik Guna Memantau Dan Mengendalikan Alat Penerima Paket Berbasis Website” no. September, pp. 1276–1286, 2022.
M. Y. Fadhlan, T. Supriyadi, M. H. Maulana, and K. Kunci, “Prototype Smart Mailbox untuk Penerimaan Paket Barang Berbasis IoT,” pp. 4–5, 2021.
A. H. Rismayana, M. S. Mustopa, and D. Rohmayani, “Rancang Bangun Kotak Penerima Paket Menggunakan Barcode Berbasis Internet of Things ( IoT ),” vol. 2, no. 2, pp. 35–40, 2022.
A. K. Marzuqin, R. Z. Abidin, T. Informatika, U. Y. Pasuruan, J. Timur, and B. Scanner, “Prototype Box Penerima Paket Otomatis Untuk Mengamankan,” vol. 7, no. 6, pp. 3746–3752, 2023.
A. Ipanhar, T. K. Wijaya, and P. Gunoto, “Perancangan Sistem Monitoring Pintu Otomatis Berbasis Iot Menggunakan ESP32-CAM” vol. 5, no. 2, pp. 333–349, 2022.
R. Wahyu, M. Himawan, and Hariadi, “Rancang Bangun Alat Penghitung Berat dan Volume Paket Berbasis Arduino,” vol. 3, no. 6, pp. 2180–2190, 2023, doi: 10.59141/comserva.v3i06.1008.
F. D. Faza, D. Mardiyanti, E. Budihartono, and A. Winarso, “Smart Box Penerima Paket Berbasis Website Menggunakan Esp32-Cam Dan Notifikasi Telegram,” vol. 1, no. 2, pp. 103–115, 2023, doi: 10.52330/jmeis.v1i2.176.